Pebeo Set of 2 Epoxy Resin Underglasses Shape-12 x 12cm Gedeo Silicon Mould-Hexagonal Coaster, 3x9x13cm, White

Pébéo - Set of 2 Silicone Moulds for Resin - Hexagonal shape 12x12cm Our silicone moulds are specially designed to allow you to create a multitude of objects in epoxy resin or plaster. Find all the quality of Pebeo in these high quality moulds. This resin kit will allow you to create coasters. Moulding decorations that are tear-resistant, flexible and very easy to remove from the mould Multiply your creations: after use, clean with soap or put the moulds in the dishwasher. Your moulds are ready to use again! Your creations will have a smooth and shiny surface Instructions for use Choose a pattern (size and thickness) according to the decorative idea. Set up in a dry, ventilated and temperate place, on a horizontal and level work surface. Evaluate the total quantity of product to be poured: measure the necessary volume by filling the chosen pattern with water and then pour into a measuring cup. Prepare the chosen product according to the instructions for use. Pour the product into the clean and dry mould. Allow to dry according to the time indicated in the user guide for the chosen product. (Setting is gradual and variable depending on the ambient temperature). Remove from the mould. Pébéo advice Installation of fixings for casting precision plaster, resin plaster and light plaster: as soon as the plaster is very pasty (about 10 minutes), push the fixing in with a rapid movement from left to right, hold for a few seconds and release. The fastener should hold without moving, let it harden. Installing fasteners for casting Gedeo resins: In the still liquid resin, use a hairpin or a paper clip to suspend and hold the fastener. To maintain your Gedeo mould: Wash in warm water without detergent or in a dishwasher. To make double-sided decorations: Glue two symmetrical designs or place the hardened design on the filled mould. Allow to harden. Remove from the mould and remove excess product if necessary. Precautions Do not place Gédéo molding decals near a flame. Do not place on a hot plate. Using a knife will damage the material.